Standing seam metal suits a lot of the homes west of Fort Worth: farmhouse-style builds, ranch homes, wraparound porches and the shops behind them. Each panel runs in one piece from the eave up to the ridge, and the edges of neighboring panels stand up and lock together in a raised seam. The fasteners sit under those seams instead of going through the face of the panel, so there are no rows of exposed screws to work loose over time.
Bluebonnet Construction & Roofing installs standing seam metal roofs on homes in Aledo and across the west side of the Fort Worth area. Cody Taylor, the owner, inspects and measures the roof and writes the estimate himself, then sends it to your email. Metal has more decisions in it than a shingle roof, from panel profile to color to how the trim is detailed, and you will be talking to the person who actually knows the answers.
If you are also weighing metal against a new architectural shingle roof, that is a fair comparison to make, and we can price both on your own house so you are looking at real numbers side by side instead of general claims.
What Goes Into a Standing Seam Metal Roof
The panels are what you see from the street, but a metal roof only performs as well as the layers and details around them.
Panels and seams
Standing seam panels are formed to the length of each slope, so most runs have no horizontal joints for water to find. The raised seams are where panels join, and they sit up off the flat of the roof, which keeps the joint above the water running down it. Panels come in different seam heights and widths, and the right choice depends on the look you want and the shape of the roof.
Concealed clips and movement
Metal grows and shrinks as it heats and cools, and a roof in North Texas sees a wide swing between a winter night and an August afternoon. With standing seam, the panels are held down by clips hidden under the seam, which lets them move a little without tearing at the fasteners. That is one of the main differences from the screw-down metal panels common on barns and sheds.
Underlayment
Under the metal goes an underlayment suited to metal roofing. It is the backup layer if water ever gets past a seam or a flashing, and it matters more on a metal roof than people expect, because it is not easy to reach once the panels are on.
Trim, flashing and penetrations
Most of the skill on a metal roof is in the edges: the eave and rake trim, the ridge, the valleys, the wall flashing, and the places where plumbing vents and chimneys come through. A clean panel install with careless trim is still a roof that leaks at the edges.
Color and finish
Standing seam panels come in a range of factory-finished colors, from dark bronze and charcoal to lighter grays and whites. Pick the color with the whole house in view, including the brick or stone, the trim and the windows, because a metal roof is a big, uniform surface that sets the tone for everything else.
Standing seam steel roofing and other metals
Most standing seam metal roofing on homes is steel, coated against rust and finished in a factory-applied color. Aluminum and copper are also made into standing seam panels, but they are used far less often on houses, and copper usually shows up as an accent rather than a whole roof. If you are curious about a metal other than steel, ask Cody what it would mean for your roof.
Metal or Shingle: Thinking It Through
There is no single right answer, which is why we price both when you ask. These are the things worth weighing.
Up-front cost. A standing seam roof generally costs more to install than an architectural shingle roof on the same house. The written estimate shows you exactly how much more on your roof, rather than a rule of thumb. For national prices by panel style and metal, see our guide to metal roof cost.
How long you plan to stay. Metal is worth pricing if you plan to stay in the house. If you are planning to sell in a few years, a shingle roof replacement may be the better fit, and we will tell you so.
Hail. Hail is part of life around Fort Worth, and metal is not immune to it. Large hail can dent panels, even if the roof still sheds water. It is worth knowing that going in. If a storm has already come through, our storm damage page explains how an inspection works on any type of roof.
The look of the house. Standing seam suits farmhouse, ranch and modern designs, and it is common on porches and accent roofs over a shingle main roof. Shingle on the main roof with metal over the porch is a pairing that works on many houses. If your home has clay tile or another specialty material instead, see our tile, slate and copper page. Thinking of replacing an aging tile roof with metal? Our guide to tile to tin roofing explains what the switch involves.
We offer standing seam metal across our service area, including Willow Park, Hudson Oaks and Granbury, along with Aledo itself.
What You Get From Bluebonnet on a Metal Roof
- Owner-written estimates. Cody Taylor inspects and measures the roof and writes every estimate himself, so the owner prices your roof.
- Both options priced. If you are deciding between metal and shingle, we can price each on your house so the comparison is honest.
- The whole roof looked at. Cody looks at the whole roof before he writes anything, and the written estimate lays out what the job includes.
- Free inspection. The inspection costs nothing, and you are under no obligation to do anything with it.
- Estimate by email. The written estimate comes to your inbox, so you can take your time with it.
- Based in Aledo. Our office is on Wingtail Drive, close to the homes we work on.
Call (214) 983-6763 or send the form to set up a free inspection and talk through a standing seam metal roof for your home.